If you like making things with your own hands, this Ubud class hits the spot. You’ll work inside a traditional silver workshop in Delodsema, learn the steps from a silversmith, and leave with jewelry you helped design. It is also one of those experiences where the setting is part of the lesson, not just a backdrop.

I like the hands-on guidance here, because the instructors focus on details like fit and finishing, not just handing you tools. I also like that the package includes 7 grams of silver, so you’re not paying extra just to start. The maximum group size of 20 also helps the atmosphere stay personal.

One consideration: this workshop is a bit out of town, so you’ll likely want pickup from Ubud (especially if you plan to use a rideshare). And since it’s a rural area, plan for mosquitos and bring your own bug repellent, even though bug spray is available on site.

Key things that make this class worth it

• Delodsema village workshop setting gives your souvenir a real sense of place
• 7 grams of silver included means you can actually finish a piece, not just practice
• Tea or coffee plus Balinese snacks start the session while you choose a design
• Small-group instruction (max 20) supports real help while you work
• You can add a second piece if time and silver allow
• Upgrades available let you pair the class with cooking, sightseeing, or ATV fun

A Balinese silver workshop near Taro, just outside Ubud

The class is based in the silversmithing village of Delodsema, in the Tegallalang area near Taro, about a short drive from Ubud. In practice, it feels like you’ve left the most tourist-heavy zones, which makes the craft feel more connected to daily life on Bali.

You start at GBE Silver Class delodsema, Jl. Taman Gajah, Taro, Tegallalang, Kabupaten Gianyar. If you’re staying in central Ubud, prebooking usually makes timing easy, and pickup is offered for extra charges if you are outside the Ubud area.

This is also a good size for a “real class.” It is not a huge factory line. The workshop operates with a limited headcount (up to 20 travelers), which matters when you want close attention to details like ring shape and comfort.

Tea, examples, and picking a design that actually works

When you arrive, you’ll be welcomed with tea or coffee and Balinese snacks. Then the instructor shows jewelry samples you can use as inspiration, which is a smart move if you don’t know where to start.

You have two paths:

• If you already have a design idea, you can sketch it out and get help bringing it to life.
• If you don’t, you build on one of the samples you like.

I like that the team encourages you to choose something that matches your skill level and the time available. A few people noted that the staff will tell you if your plan is too ambitious, which is actually helpful. Jewelry making can take longer than you expect when you’re learning hammering, soldering, engraving, and cutting for the first time.

Also, if you’ve ever tried to “describe” what you want to someone, you know how hard it can be. Here, you are working from references and a live instructor, so you don’t end up with a shrug-and-hope souvenir.

Shaping and finishing your silver, step by step

Once your design is chosen, you start working with the included silver. The class package includes 7 grams (about 0.25 ounce) of silver, which is enough for a finished piece for most people, and it gives you room to think creatively without constantly worrying about running out.

From there, you’ll learn the core techniques that make Balinese silver jewelry what it is:

• hammering and soldering (for shaping and joining)
• engraving and cutting (for detailing)

In simple terms, you are turning a flat, workable material into something with structure, edges, and finish. That’s why the instruction quality matters. People consistently praised the patience and attention to detail from the workshop team, including instructors like Wawam, and guides/drivers like Olen and Budi in past sessions.

What you can make depends on how your piece progresses and how much time you have. Some participants specifically mention options like rings, pendants, bangles, and earrings. If there’s time and silver left, you may be able to create another piece, which is a great way to get better value from the included metal.

Practical tip: go in ready to slow down. Jewelry making is exacting. If you rush, your lines and fit suffer. If you take it step by step, you’ll be surprised how quickly you start seeing your design take shape.

Your take-home jewelry, and the real question: value

The headline value is simple: you are paying for instruction plus a real souvenir made partly by you. The included 7 grams of silver is the foundation, and most people leave wearing or gifting something they could not buy off a shelf with the same meaning.

Your final cost can change if you want upgrades. The data is clear that there is an additional charge if you use gemstones, and extra silver costs 80k per gram. That’s worth planning for, because the easiest way to control your budget is to decide upfront if you want a stone or if you’ll stick with the silver you’re given.

In the shorter version, some people reported getting less silver (like 5 grams) and still making a finished ring or pendant. The main idea for you: longer sessions tend to give more breathing room for detailing, fixing fit issues, and finishing cleanly.

At $36.66 per person, this class can be good value if you want a hands-on Bali craft souvenir. You’re not just touring a workshop, you are making something with guidance. You are also getting a structured activity that takes about 3 hours (approx.), which is an efficient use of your Ubud day.

Pickup, timing, and how to plan your day from Ubud

The experience is designed for prebooking so you get a class time that fits your schedule. Pickup is offered if you’re in the Ubud area, but pickup from elsewhere can cost extra. If you choose the pickup option, you will return to your Ubud address at the end of your activities.

If you do not choose pickup, you return to the meeting point when the class ends. That sounds minor, but it affects logistics, especially if you are traveling with limited time between Ubud attractions.

People who have done the drive note it takes around 40 minutes and feels scenic, plus the workshop area is not super touristy. They also suggest that paying for pickup is often worth it, since rideshare access can be less convenient farther out.

Practical planning advice:

• Book a time slot where you are not racing to a dinner reservation.
• If you add another activity, schedule it after the class so your fingers are not dealing with extra travel and bags right away.

Turning it into a full Bali day with smart add-ons

One of the reasons this workshop works well is that it can plug into a broader day. There are optional upgrades that you can book alongside the class, including:

• ATV or quad bike tour
• cooking class
• village visit
• sightseeing tour
• retro Volkswagen Safari

The add-ons may happen before or after your silversmithing session. This flexibility is useful when you want to balance a hands-on craft with something active or scenic.

If you like local culture beyond crafts, pairing the workshop with a cooking class is a solid match, because both focus on process and everyday life rather than just landmarks. If you prefer a more energetic pace, the ATV option gives you a change of energy after you’ve been working carefully with your hands.

Choose based on your day style. This workshop is patient and detail-focused. ATV and Safari are louder and faster. Mix them if you want contrast, not if you already feel overbooked.

Small details that matter in the workshop

A few real-world factors can affect comfort and your final experience.

Mosquitos: since the workshop is in a more rural area, mosquitos can be around. One review specifically noted mosquitos and said bug spray was provided. Still, I’d treat this as a “bring your own repellent” situation so you’re not stuck waiting for whatever the workshop provides.

Your pace: even with support, jewelry making takes concentration. People praised the instructors for helping beginners succeed, including making rings that fit properly. That’s good news if you worry you’re not artistic. Still, you’ll do better if you listen, ask questions early, and don’t assume you can multitask.

Tool learning curve: hammering, soldering, engraving, and cutting sound intimidating, but the class is structured to guide you. The key is to let the instructor lead and trust the process rather than forcing your design to match an idea you had in your head.

Who this class suits best, and who might not love it

This is a great fit if you want a meaningful Bali souvenir and you enjoy making something yourself. It is also a nice couples option, because matching pieces are a common highlight. People have even made jewelry for anniversaries, and the shared activity tends to feel memorable.

It also works well for families and a range of ages, since the listing says most travelers can participate. The workshop team is set up to guide you through the steps, including sketching and shaping.

You might not love it if:

• you want mostly sightseeing and minimal sitting/precision work
• you are strongly uncomfortable with tools and fine motor tasks
• you are trying to pack in so many activities that the class feels rushed

Should you book Ubud Silver Class Jewelry making?

Yes, if you want a real craft experience and a take-home piece that you helped create. The value is strongest when you care about the process: choosing a design, working with silversmith techniques, and leaving with jewelry that’s genuinely yours.

Book it even more confidently if you:

• plan to use the included silver and avoid surprise upgrades
• want pickup from Ubud, since the workshop is farther out than it looks on a map
• are okay with a rural setting, including mosquitos and a more outdoor-feeling approach

If you are on the fence, here’s my quick decision rule: if making a ring or pendant sounds fun, do it. If you only want photos and shopping, skip it and spend your time elsewhere.

FAQ

How long is the silver jewelry making class?

The duration is about 3 hours.

Where does the class start and end?

It starts at GBE Silver Class delodsema, Jl. Taman Gajah, Taro, Kec. Tegallalang, Kabupaten Gianyar, Bali 80561, Indonesia. It ends back at the meeting point.

Is pickup offered from Ubud?

Pickup is offered if you are in the Ubud area, with extra charges if you are picked up from elsewhere.

What’s included in the price?

Your price includes a welcome drink, 7 grams of silver, an experienced instructor or local expert, and help to make jewelry using the included silver.

Can I make more than one piece?

You can make multiple jewelry items as long as you have enough silver, and if there is time and silver left, you may be able to create another piece.

Can I use my own design?

Yes. If you have your own design idea, your teacher can help you sketch it out and guide you through making it.

What extra costs should I expect for gemstones or more silver?

Gemstones cost extra if you use them, and extra silver is listed at 80k per gram.

What add-ons can I combine with the class?

Optional upgrades include ATV or quad bike tours, a cooking class, a village visit, a sightseeing tour, and a retro Volkswagen Safari.

How many people are in the group?

The class has a maximum of 20 travelers.

Can I cancel for a full refund?

Yes, free cancellation is available up to 24 hours in advance for a full refund. After that, the amount paid is not refunded.